Availability: | |
---|---|
One Way Needle Roller Clutches Bearings HF0812
The outer ring of the drawn cup needle roller bearings is made of thin steel plates by precision stamping, with a small structural space and a large load capacity. It is suitable for occasions where the installation space is limited and the housing is not suitable as a raceway. And after pressing into the seat hole, no further axial positioning is needed. This type of needle roller bearings generally do not need an outer ring. If you need to use an outer ring, you can choose from the sample, and there is no need for further axial positioning after pressing into the seat hole. Drawn cup needle roller bearings are extremely effective for sealing shaft ends. Grease lubricated needle roller bearings can be used for a long time at -20 ℃ -120 ℃.
轴径 Shaft Diameter | 轴承型号 Bearing Designation | 外形尺寸 Boundary Dimensions(mm) | 传动力矩 Driving Torque Md | 极限转速 Linmiting Speed (rpm) | 重量 Mass | |||||
(mm) | 现行代号 Current Designation | 原代号 Original Designation |
FW |
D |
C |
min |
(Nm) |
n |
nA |
(kg) |
6 | HF0612 | - | 6 | 10 | 12 | 0.3 | 1.76 | 20000 | 13000 | 0.00300 |
8 | HF0812 | - | 8 | 12 | 12 | 0.3 | 3.15 | 16000 | 11000 | 0.00350 |
HFL0822 | DX-81212 | 8 | 12 | 22 | 0.3 | 3.15 | 16000 | 11000 | 0.00588 | |
10 | HF1012 | - | 10 | 14 | 12 | 0.3 | 5.3 | 14000 | 11000 | 0.00422 |
HFL1022 | - | 10 | 14 | 22 | 0.3 | 5.3 | 14000 | 11000 | 0.00712 | |
12 | HF1216 | - | 12 | 18 | 16 | 0.3 | 12.2 | 10000 | 7000 | 0.01050 |
HFL1226 | - | 12 | 18 | 26 | 0.3 | 12.2 | 10000 | 7000 | 0.01800 | |
14 | HF1416 | - | 14 | 20 | 16 | 0.3 | 17.3 | 8500 | 7000 | 0.01230 |
HFL1426 | - | 14 | 20 | 26 | 0.3 | 17.3 | 8500 | 7000 | 0.02048 | |
16 | HFL1616 | - | 16 | 22 | 16 | 0.3 | 20.5 | 8500 | 7000 | 0.01250 |
HFL162224 | - | 16 | 22 | 24 | 0.3 | 20.5 | 8500 | 7000 | 0.01900 | |
HFL1626 | - | 16 | 22 | 26 | 0.3 | 20.5 | 8500 | 7000 | 0.02179 | |
19.05 | RC121610FS | - | 19.05 | 25.4 | 15.88 | 0.3 | 22.1 | 0.01770 | ||
HF202611 | - | 20 | 26 | 11 | 0.3 | 16 | 6500 | 6500 | 0.01104 | |
20 | HF2012 | - | 20 | 26 | 12 | 0.3 | 17 | 6500 | 6500 | 0.01222 |
HF2016 | - | 20 | 26 | 16 | 0.3 | 28.5 | 6500 | 6500 | 0.02180 | |
HFL2026 | - | 20 | 26 | 20 | 0.3 | 28.5 | 0.02561 | |||
25 | HF2520 | - | 25 | 32 | 20 | 0.3 | 66 | 5000 | 5000 | 0.03030 |
RC-162108-FS | - | 25.4 | 33.34 | 12.7 | 0.3 | 30 | 5000 | 5000 | 0.01935 | |
25.4 | RC-162110-FS | - | 25.4 | 33.338 | 15.88 | 0.3 | 67 | 5000 | 5000 | 0.03040 |
RCB-162117 | - | 25.4 | 33.34 | 26.99 | 0.3 | 67 | 5000 | 5000 | 0.05170 | |
30 | HF3016 | - | 30 | 37 | 16 | 0.3 | 70 | 4000 | 4000 | 0.02840 |
HF3030 | - | 30 | 37 | 20 | 0.3 | 90 | 4000 | 4000 | 0.03490 | |
35 | HF3520 | - | 35 | 42 | 20 | 0.3 | 121 | 3700 | 3700 | 0.04140 |
One Way Needle Roller Clutches Bearings HF0812
The outer ring of the drawn cup needle roller bearings is made of thin steel plates by precision stamping, with a small structural space and a large load capacity. It is suitable for occasions where the installation space is limited and the housing is not suitable as a raceway. And after pressing into the seat hole, no further axial positioning is needed. This type of needle roller bearings generally do not need an outer ring. If you need to use an outer ring, you can choose from the sample, and there is no need for further axial positioning after pressing into the seat hole. Drawn cup needle roller bearings are extremely effective for sealing shaft ends. Grease lubricated needle roller bearings can be used for a long time at -20 ℃ -120 ℃.
轴径 Shaft Diameter | 轴承型号 Bearing Designation | 外形尺寸 Boundary Dimensions(mm) | 传动力矩 Driving Torque Md | 极限转速 Linmiting Speed (rpm) | 重量 Mass | |||||
(mm) | 现行代号 Current Designation | 原代号 Original Designation |
FW |
D |
C |
min |
(Nm) |
n |
nA |
(kg) |
6 | HF0612 | - | 6 | 10 | 12 | 0.3 | 1.76 | 20000 | 13000 | 0.00300 |
8 | HF0812 | - | 8 | 12 | 12 | 0.3 | 3.15 | 16000 | 11000 | 0.00350 |
HFL0822 | DX-81212 | 8 | 12 | 22 | 0.3 | 3.15 | 16000 | 11000 | 0.00588 | |
10 | HF1012 | - | 10 | 14 | 12 | 0.3 | 5.3 | 14000 | 11000 | 0.00422 |
HFL1022 | - | 10 | 14 | 22 | 0.3 | 5.3 | 14000 | 11000 | 0.00712 | |
12 | HF1216 | - | 12 | 18 | 16 | 0.3 | 12.2 | 10000 | 7000 | 0.01050 |
HFL1226 | - | 12 | 18 | 26 | 0.3 | 12.2 | 10000 | 7000 | 0.01800 | |
14 | HF1416 | - | 14 | 20 | 16 | 0.3 | 17.3 | 8500 | 7000 | 0.01230 |
HFL1426 | - | 14 | 20 | 26 | 0.3 | 17.3 | 8500 | 7000 | 0.02048 | |
16 | HFL1616 | - | 16 | 22 | 16 | 0.3 | 20.5 | 8500 | 7000 | 0.01250 |
HFL162224 | - | 16 | 22 | 24 | 0.3 | 20.5 | 8500 | 7000 | 0.01900 | |
HFL1626 | - | 16 | 22 | 26 | 0.3 | 20.5 | 8500 | 7000 | 0.02179 | |
19.05 | RC121610FS | - | 19.05 | 25.4 | 15.88 | 0.3 | 22.1 | 0.01770 | ||
HF202611 | - | 20 | 26 | 11 | 0.3 | 16 | 6500 | 6500 | 0.01104 | |
20 | HF2012 | - | 20 | 26 | 12 | 0.3 | 17 | 6500 | 6500 | 0.01222 |
HF2016 | - | 20 | 26 | 16 | 0.3 | 28.5 | 6500 | 6500 | 0.02180 | |
HFL2026 | - | 20 | 26 | 20 | 0.3 | 28.5 | 0.02561 | |||
25 | HF2520 | - | 25 | 32 | 20 | 0.3 | 66 | 5000 | 5000 | 0.03030 |
RC-162108-FS | - | 25.4 | 33.34 | 12.7 | 0.3 | 30 | 5000 | 5000 | 0.01935 | |
25.4 | RC-162110-FS | - | 25.4 | 33.338 | 15.88 | 0.3 | 67 | 5000 | 5000 | 0.03040 |
RCB-162117 | - | 25.4 | 33.34 | 26.99 | 0.3 | 67 | 5000 | 5000 | 0.05170 | |
30 | HF3016 | - | 30 | 37 | 16 | 0.3 | 70 | 4000 | 4000 | 0.02840 |
HF3030 | - | 30 | 37 | 20 | 0.3 | 90 | 4000 | 4000 | 0.03490 | |
35 | HF3520 | - | 35 | 42 | 20 | 0.3 | 121 | 3700 | 3700 | 0.04140 |